Blog

Recycle the sheet of your Santa to paint!

Required equipment:

• Paper: Santa to paint background

• Scissors

• Ruler

• Glue

• Needle

• String

• Wooden bead

Realization:

1. After tasting the Santa to paint*, remove the sheet from the bottom of the wooden box.

2. Place the sheet so that there is a knot on the left and a knot on the right.

3. Measure 12 cm in height and cut at this mark to obtain two sheets of different sizes. Fold each sheet on itself to obtain a fan. Round the corners: make sure the smaller sheet is about 1.5 cm shorter. Each fold should be about 2 cm wide.

4. Determine and mark the center of the two fans. Make a hole with a big needle. Cut a string about 20 cm long. Place the small fan above the large one to pass the string through both holes.

5. Form a loop on the top and tie the ends underneath. Thread a bead onto the loop and tie a knot so it doesn't slide.

6. Fold the fan in half and glue the two faces. Unfold the two fans and assemble them by gluing the faces at the ends.

Follow the DIY steps in the video!

Share your beautiful creation on social networks with the hashtag #lecomptoirdemathilde!